In ground posts = 1800mm Long x 50mm�square���

Weight -
+-4.5kg

Description -
For 1355mm long core drilled posts:������
�A�hole must be core drilled into the tile and concrete base. The hole diameter must be 76mm for�square posts�and the depth of the hole must be a minimum of� 100mm.
Grout for the core drilled holes can be ordered from the Accessories page. 1 bag will do approximately 20 holes.

For 1255mm long flange mounted posts:
For fixing onto timber decks use�four 60mm long s/steel batten screws.
For fixing onto tiled and concreted areas we recommend 2 x 60mm long s/steel dyna bolts (2 hole base plate). These can be ordered from our Accessories�page.���

For 1800mm long��in ground posts:
A�hole 300mm x 300mm x 450mm deep must be dug.�Quick set concrete is used to set the post in position.
Quick set concrete can be ordered from the Accessories page. Approximately 1 bag per hole.�

If any of the above posts are going to be used as an end post, the maximum gap between the post and the wall or fence is 100mm.

�